Bibs Colour 2 Pack Latex Size 2 Glow

GLOW pacifiers with a practical glow feature. Hold the pacifier in light for 5 sec. to activate the glow. The luminescent effect lasts for 8+ hours.
The round nipple resembles the shape and size of the mother’s soft nipple and promotes a similar tongue placement and sucking technique as when breastfeeding since the round shape allows the sides of the tongue to elevate and cup around the nipple.

The nipple is equipped with a valve that lets out air when the baby closes down on the nipple thereby flattening the nipple to shape naturally after the baby's oral cavity.

The round lightweight shield faces away from the sensitive and delicate skin around the baby's mouth to ensure minimum contact with the baby's nose and mouth, which means less chance of moisture build-up from saliva that can cause rashes and sore spots.

The nipple is produced from natural rubber latex. Since natural rubber latex is a natural material, color variation may occur.

The shield is made of 100% safe Food Grade PP.
Complies with the European Standard EN 1400+A2.

Material : Natural Rubber Latex
QUALITY : Complies with the European Standard EN 1400+A2.
CLEANING : Part of good pacifier hygiene is frequent cleaning of the pacifiers. The younger the child, the more important it is to protect it from bacteria and maintain good pacifier hygiene.

There are different methods of sterilizing pacifiers. Below we will go through all of them:

Before first use
Remember to sterilize the pacifiers when you take them out of the packaging! This is done by putting the pacifiers in plenty of boiling water for 5 minutes. This applies to both latex and silicone pacifiers.

Natural rubber latex can smear off to the shield in rare cases, so it is important to sterilize in plenty of water and we recommend sterilizing latex pacifiers separately. This only applies before first use.

Sterilization by scolding
This is the method we recommend for cleaning both latex and silicone pacifiers subsequently:

Put the pacifiers in a clean bowl. Pour boiling water over the pacifiers.
Let the pacifiers soak for approx. 5 min.
Pick them up and let them dry on a clean towel.

Sterilization by microwave sterilization
Be aware that latex will break down if the temperature exceeds 100°C / 212°F. Therefore, we do not recommend microwave sterilization of natural rubber latex.

Sterilization by electric steam sterilizing devices
Be aware that latex will break down if the temperature exceeds 100°C / 212°F. Therefore, we do not recommend using steam sterilizer devices for natural rubber latex pacifiers.

Sterilization by UV sterilizing devices
We do not recommend using UV sterilizing devices for either natural rubber latex or silicone pacifiers.
Size 1: 0+ months
Dimension 6 x 2.8 x 5 cm.